Printer will not print multiple copies

Mopier Mode is a technology originating with Hewlett-Packard (HP), and is loosely defined as, Multiple Original Copier, or, "Mopier".  Mopier Mode was developed as a communication protocol to help reduce network traffic in that it solved the problem of having to submit the same print job multiple times and instead allowed for only one print job to be submitted, but printed multiple times.

Mopier Mode is likely enabled on modern and newer generic printer drivers.  Those drivers, along with Mopier Mode, make an assumption that the printer has an internal storage device capable of saving and queuing the print job for multiple copies.  On older printers or printers without internal storage (common with small, traveling printers), this mode, when enabled, can prevent that multiple copies signal to be ignored by the printer. 

***Please note: Mopier Mode is NOT enabled for the campus Canon copier/printer units connected to SecurePrint. If this issue is experienced on a such a printer, that indicates an incorrect driver is installed and this article will not provide a solution. Please contact the UW IT Help Desk for further assistance. 

 

To Disable:

Navigate to Control Panel -> Devices and Printers -> Select the appropriate printer -> Right click and select printer properties. Then under the tab device settings ensure Mopier Mode is set to disabled.

* Adjusting this setting requires ABR, or Administrative permissions on campus-owned PCs.

screen shot showing the Device Setting for a printer in Windows 11 with the Mopier Mode showing as disabled indicated.

Was this helpful?
0 reviews