Body
To encrypt your machine, it is important that you first back it up. A full how to on how to perform a backup on your windows machine can be found here: https://uwyo.teamdynamix.com/TDClient/KB/ArticleDet?ID=76650
Once you have completed a backup of your computer, you may proceed in setting up Bitlocker through Windows 10 to encrypt your computer. The instructions are below.
- To encrypt using bitlocker,you must first enable software encryption. To do this, open up group policy editor by hitting windows key + R on your keyboard to open the run command. In the run command box, type in: gpedit.msc and click OK.
- Under Computer Configuration, expand Administrative Templates
- Expand Windows Components
- Expand BitLocker Drive Encryption and Operating System Drives
- On the right side, double-click Require additional authentication at startup.
- Select Enabled.
- Make sure to check the option to “Allow BitLocker without a compatible TPM (requires a password or a startup key on a USB flash drive”) option.
Click OK to complete this process.
- At this point, we can turn on BitLocker on the Operating system drive. To do so, do the following:
- Use the windows key + X keyboard shortcut to open the Power User menu and select Control Panel.
- Click System and security.
- Click BitLocker Drive Encryption
Under Bitlocker Drive
- Under Bitlocker Drive Encryption, click “Turn on BitLocker”.
- Choose how you want to unlock your drive during setup. We typically recommend using a password. Make sure you can remember that password as you will need it to unlock the drive for access.
- Enter a password you’ll use every time you boot to windows 10 to unlock the drive, then click Next to continue.
- You will now be given choices to save a recovery key to regain access to your files in case you forget your password. Options include:
- Saving to a USB flash drive
- Saving to a file
- Print the recovery
- Select the option most convenient to you. We typically recommend saving to the USB flash drive in which you previously backed up, then copying that to your \\warehouse\userstorage$ drive.
Select the option to Encrypt used disk space only then click next.
- Next choose the new encryption mode.
- Make sure to check “Run Bitlocker System check” option and click Continue.
- Now restart your computer and begin the encryption process. Please note that your computer will run slower while your system is being encrypted.
- Upon reboot, Bitlocker will prompt you to enter your encryption password to unlock the drive. Enter your password as configured earlier, and press Enter.
